"The AutoBOX has the perfect balance of performance and function. It gives us versatility and speed..."
Add-on modules:
Box Printing:
Box Gluing:
BX Motion Pro
The BX Motion Pro is the radical new shortrun boxmaking system that brings previously undreamt of levels productivity and efficiency to your boxmaking process. Re-designed from the ground up, using close to 50 years Autobox boxmaking experience, you will benefit from groundbreaking new automation, set times and all in one functionality.
Almost every feature of the BX Motion Pro is set up automatically whilst also being individually controlled for bespoke settings. A typical set time for a single out sheet remains at just 60 seconds. Set times to achieve 3 out across the width are done in a unique way allowing for a set up within a matter of minutes.
Crease wheels, slitting knives, diecut stations, digital print heads, slotting knives and hold down carriers are set up using the HMI interface.
The modular design empowers you to make customised single & double wall boxes as standard. The robust construction of the BX Motion Pro is of such that it can also convert the heaviest triple wall materials too with selectable converting tools to suit this application.
Almost every feature of the BX Motion Pro is set up automatically whilst also being individually controlled for bespoke settings. A typical set time for a single out sheet remains at just 60 seconds. Set times to achieve 3 out across the width are done in a unique way allowing for a set up within a matter of minutes.
Crease wheels, slitting knives, diecut stations, digital print heads, slotting knives and hold down carriers are set up using the HMI interface.
The modular design empowers you to make customised single & double wall boxes as standard. The robust construction of the BX Motion Pro is of such that it can also convert the heaviest triple wall materials too with selectable converting tools to suit this application.
- Convert from 1-16mm
- Set up in less than 60 seconds
- 3 out width box production within a few minutes
- Digital print options up to 1120mm wide x unlimited length.
- Automatic feeding and stacking
- Waste shredders for waste management
- Makes around 100 Fefco styles
- Inline glue and flap crush options available
Specify your bespoke boxmaking solution from the following optional functionality
Creasing Tools
Options for a range of creasing profiles to convert whatever grade you require
• Material thickness is set up automatically
• Male/female creasing tools
• 1-point, 2-point and 3-point creasing depending on board weight
• Up to 8 crease wheels per axis
Crease standard, bottom crease and line cut
HD crease male/female
HD shear cut
Edge trimming
• Side trim can be shredded and transported out of the machine
• Material thickness up to 15 mm
Waste Shredder
Inline Digital Printing
• From 140mm up to 1120mm width print area
• Resolution 360 dpi
Cross cutting
• Pneumatically controlled
Cross cut with optional inline glue and flap crush on same axis
Inline Gluing
• Cold glue, automatic nozzle gluer for selected areas
Multi-Out option
• Produce up to 3 out across width in one pass
• Auto setting of outer slotting knives
• Manual set for inner knives
Delivery
• Delivery table, collects blanks for stacking
Infeed/ Feed section
The Bx Motion Pro comes as standard with a built in, table feeder with high traction belts to pull in the bottom sheet. Automatic feeding is an option with the AUTO-FEED AF300.
The Bx Motion Pro comes as standard with a built in, table feeder with high traction belts to pull in the bottom sheet. Automatic feeding is an option with the AUTO-FEED AF300.
Creasing Tools
Options for a range of creasing profiles to convert whatever grade you require
• Material thickness is set up automatically
• Male/female creasing tools
• 1-point, 2-point and 3-point creasing depending on board weight
• Up to 8 crease wheels per axis
Crease standard, bottom crease and line cut
HD crease male/female
Line Cutting
• Up to 16 mm thickness
• HD Shear Cut Ø 180 mm
• Servo-controlled drive
• Up to 16 mm thickness
• HD Shear Cut Ø 180 mm
• Servo-controlled drive
HD shear cut
Edge trimming
• Side trim can be shredded and transported out of the machine
• Material thickness up to 15 mm
Waste Shredder
Inline Digital Printing
• From 140mm up to 1120mm width print area
• Resolution 360 dpi
• Automatic print head cleaning as standard
• Can be set up individually to print in multiple locations or stitched together for larger print area
• Can be set up individually to print in multiple locations or stitched together for larger print area
Cross cutting
• Pneumatically controlled
Cross cut with optional inline glue and flap crush on same axis
Inline Gluing
• Cold glue, automatic nozzle gluer for selected areas
Glue flap Crush
• Pneumatically controlled flap crush with adjustable pressure
• Width up to 40 mm
• Eliminates “apexing” in stacked boxes
• Gives a more stablised pallet
• Allows for more on a pallet
Die Cutting
Automatic set up of diecut stations
Slotting
• Auto set outer slotting knives
• Automated cross creasing and correction of creasing depth
• Cross conveyor belt for slot waste
Automatic set up of diecut stations
Slotting
• Auto set outer slotting knives
• Automated cross creasing and correction of creasing depth
• Cross conveyor belt for slot waste
Multi-Out option
• Produce up to 3 out across width in one pass
• Auto setting of outer slotting knives
• Manual set for inner knives
Delivery
• Delivery table, collects blanks for stacking
• AutoStacker option automatically collects and stacks blanks on scissor lift table